产品展厅
产品展厅
温馨提示：因橡塑行情波动太大，线上价格未能及时更新，更多详情及技术问题请来电咨询(微信同号）
特性：33％玻璃纤维增强，热稳定的黑色聚酰胺66树脂，具有出色的抗冲击性。
用途：注塑成型，汽车，家具，家用电器。
Zytel® 80G33HS1L NC010 is a 33% glass fiber reinforced heat stabilized polyamide 66 resin with outstanding impact resistance developed using DuPont Super Tough technology.
| Rheological properties | dry / cond | Unit | Test Standard |
| Molding shrinkage, parallel | 0.3 / * | % | ISO 294-4, 2577 |
| Molding shrinkage, normal | 0.7 / * | % | ISO 294-4, 2577 |
| Mechanical properties | dry / cond | Unit | Test Standard |
| Tensile modulus | 8900 / 6200 | MPa | ISO 527-1/-2 |
| Stress at break | 146 / 108 | MPa | ISO 527-1/-2 |
| Strain at break | 3.7 / 7 | % | ISO 527-1/-2 |
| Tensile creep modulus, 1h | * / 5300 | MPa | ISO 899-1 |
| Tensile creep modulus, 1000h | * / 4300 | MPa | ISO 899-1 |
| Charpy impact strength, +23°C | 97 / 98 | kJ/m2 | ISO 179/1eU |
| Charpy impact strength, -30°C | 106 / 100 | kJ/m2 | ISO 179/1eU |
| Charpy notched impact strength, +23°C | 20 / 28 | kJ/m2 | ISO 179/1eA |
| Charpy notched impact strength, -30°C | 18 / 17 | kJ/m2 | ISO 179/1eA |
| Thermal properties | dry / cond | Unit | Test Standard |
| Melting temperature, 10°C/min | 262 / * | °C | ISO 11357-1/-3 |
| Glass transition temperature, 10°C/min | 75 / * | °C | ISO 11357-1/-2 |
| Temp. of deflection under load, 1.80 MPa | 246 / * | °C | ISO 75-1/-2 |
| Temp. of deflection under load, 0.45 MPa | 261 / * | °C | ISO 75-1/-2 |
| Vicat softening temperature, 50°C/h 50N | 245 / * | °C | ISO 306 |
| Coeff. of linear therm. expansion, parallel | 15 / * | E-6/K | ISO 11359-1/-2 |
| Coeff. of linear therm. expansion, normal | 120 / * | E-6/K | ISO 11359-1/-2 |
| Burning behavior at 1.5 mm nominal thickness | HB / * | class | IEC 60695-11-10 |
| Thickness tested (1.5) | 1.5 / * | mm | IEC 60695-11-10 |
| Yellow Card available | Yes / * | - | - |
| Burning behavior at thickness h | HB / * | class | IEC 60695-11-10 |
| Thickness tested (h) | 0.8 / * | mm | IEC 60695-11-10 |
| Yellow Card available | Yes / * | - | - |
| Burning rate, thickness 1 mm | 23 | mm/min | ISO 3795 (FMVSS 302) |
| FMVSS | SE/B | - | ISO 3795 (FMVSS 302) |
| Electrical properties | dry / cond | Unit | Test Standard |
| Relative permittivity, 1MHz | 3.6 / 4.3 | - | IEC 62631-2-1 |
| Dissipation factor, 1MHz | 130 / 600 | E-4 | IEC 62631-2-1 |
| Volume resistivity | >1E13 / 1E9 | Ohm*m | IEC 62631-3-1 |
| Surface resistivity | * / 1E12 | Ohm | IEC 62631-3-2 |
| Comparative tracking index | - / 425 | - | IEC 60112 |
| Other properties | dry / cond | Unit | Test Standard |
| Water absorption | 4.5 / * | % | Sim. to ISO 62 |
| Humidity absorption | 1.5 / * | % | Sim. to ISO 62 |
| Density | 1330 / - | kg/m3 | ISO 1183 |
| Material specific properties | dry / cond | Unit | Test Standard |
| Viscosity number | 144 / * | cm3/g | ISO 307, 1157, 1628 |
| Rheological calculation properties | Value | Unit | Test Standard |
| Density of melt | 1120 | kg/m3 | - |
| Thermal conductivity of melt | 0.22 | W/(m K) | - |
| Spec. heat capacity melt | 2200 | J/(kg K) | - |
| Eff. thermal diffusivity | 9E-8 | m2/s | - |
| Ejection temperature | 210 | °C | - |
