产品展厅
产品展厅
温馨提示：因橡塑行情波动太大，线上价格未能及时更新，更多详情及技术问题请来电咨询(微信同号）
特性：79G13HSL BK039是13%玻璃增强，热稳定，润滑轻微增韧黑色尼龙66注塑成型。它提高了抗冲击性。
用途：注塑成型，汽车，家具，家用电器。
| Rheological properties | dry / cond | Unit | Test Standard |
| Molding shrinkage, parallel | 0.5 / * | % | ISO 294-4, 2577 |
| Molding shrinkage, normal | 0.8 / * | % | ISO 294-4, 2577 |
| Mechanical properties | dry / cond | Unit | Test Standard |
| Tensile modulus | 5100 / 3700 | MPa | ISO 527-1/-2 |
| Stress at break | 115 / 67 | MPa | ISO 527-1/-2 |
| Strain at break | 4 / 10 | % | ISO 527-1/-2 |
| Charpy impact strength, +23°C | 67 / 59 | kJ/m2 | ISO 179/1eU |
| Charpy impact strength, -30°C | 59 / 54 | kJ/m2 | ISO 179/1eU |
| Charpy notched impact strength, +23°C | 8 / 12 | kJ/m2 | ISO 179/1eA |
| Charpy notched impact strength, -30°C | 6 / 6 | kJ/m2 | ISO 179/1eA |
| Thermal properties | dry / cond | Unit | Test Standard |
| Melting temperature, 10°C/min | 262 / * | °C | ISO 11357-1/-3 |
| Temp. of deflection under load, 1.80 MPa | 240 / * | °C | ISO 75-1/-2 |
| Temp. of deflection under load, 0.45 MPa | 260 / * | °C | ISO 75-1/-2 |
| Burning behavior at 1.5 mm nominal thickness | HB / * | class | IEC 60695-11-10 |
| Thickness tested (1.5) | 1.5 / * | mm | IEC 60695-11-10 |
| Yellow Card available | Yes / * | - | - |
| Burning behavior at thickness h | HB / * | class | IEC 60695-11-10 |
| Thickness tested (h) | 0.8 / * | mm | IEC 60695-11-10 |
| Yellow Card available | Yes / * | - | - |
| Burning rate, thickness 1 mm | 24 | mm/min | ISO 3795 (FMVSS 302) |
| FMVSS | B | - | ISO 3795 (FMVSS 302) |
| Electrical properties | dry / cond | Unit | Test Standard |
| Volume resistivity | >1E13 / 1E10 | Ohm*m | IEC 62631-3-1 |
| Surface resistivity | * / 1E12 | Ohm | IEC 62631-3-2 |
| Electric strength | 44 / 32 | kV/mm | IEC 60243-1 |
| Other properties | dry / cond | Unit | Test Standard |
| Density | 1210 / - | kg/m3 | ISO 1183 |
| Material specific properties | dry / cond | Unit | Test Standard |
| Viscosity number | 163 / * | cm3/g | ISO 307, 1157, 1628 |
| Rheological calculation properties | Value | Unit | Test Standard |
| Ejection temperature | 210 | °C | - |
