产品展厅
产品展厅
温馨提示：
因橡塑行情波动太大，线上价格未能及时更新，更多详情及技术请来电咨询(微信同号）
| 等级 | 厂家 | 型号 | 特性 | 用途 |
|---|---|---|---|---|
| 电镀级 | 科思创 ® Covestro | T45PG | ABS + PC共混物; 维卡/ B 120温度= 112°C; 用于电镀应用 | 汽车业、电气和电子行业 |
| 电镀级 | 科思创 ® Covestro | T65PG | （PC + ABS） - 共混; Vicat / B 120温度= 120℃; 容易流动; 耐热性好; 用于电镀应用 | 汽车业、电气和电子行业 |
| 电镀级 | 科思创 ® Covestro | T90XG | （PC + ABS） - 共混; 电镀 维卡/ B 120温度= 135°C; 容易流动; 优化金属化表面质量（蒸汽处理） | 汽车业、电气和电子行业 |
| 电镀级 | 科思创 ® Covestro | T80 XG | （PC + ABS） - 共混; 电镀 维卡/ B 120温度= 130°C; 流动性好; 优化金属化表面质量（蒸汽处理） | 汽车业、电气和电子行业 |
| Rheological properties | Value | Unit | Test Standard |
| Melt volume-flow rate, MVR | 12 | cm3/10min | ISO 1133 |
| Temperature | 260 | °C | ISO 1133 |
| Load | 5 | kg | ISO 1133 |
| Mechanical properties | Value | Unit | Test Standard |
| Tensile modulus | 2100 | MPa | ISO 527-1/-2 |
| Yield stress | 49 | MPa | ISO 527-1/-2 |
| Yield strain | 3.7 | % | ISO 527-1/-2 |
| Thermal properties | Value | Unit | Test Standard |
| Temp. of deflection under load, 1.80 MPa | 95 | °C | ISO 75-1/-2 |
| Temp. of deflection under load, 0.45 MPa | 112 | °C | ISO 75-1/-2 |
| Vicat softening temperature, 50°C/h 50N | 110 | °C | ISO 306 |
| Coeff. of linear therm. expansion, parallel | 85 | E-6/K | ISO 11359-1/-2 |
| Coeff. of linear therm. expansion, normal | 90 | E-6/K | ISO 11359-1/-2 |
| Burning behavior at thickness h | HB | class | IEC 60695-11-10 |
| Thickness tested (h) | 0.8 | mm | IEC 60695-11-10 |
| Oxygen index | 20 | % | ISO 4589-1/-2 |
| Electrical properties | Value | Unit | Test Standard |
| Relative permittivity, 100Hz | 3.1 | - | IEC 62631-2-1 |
| Relative permittivity, 1MHz | 3 | - | IEC 62631-2-1 |
| Dissipation factor, 100Hz | 35 | E-4 | IEC 62631-2-1 |
| Dissipation factor, 1MHz | 85 | E-4 | IEC 62631-2-1 |
| Volume resistivity | >1E13 | Ohm*m | IEC 62631-3-1 |
| Surface resistivity | >1E15 | Ohm | IEC 62631-3-2 |
| Electric strength | 35 | kV/mm | IEC 60243-1 |
| Comparative tracking index | 275 | - | IEC 60112 |
| Other properties | Value | Unit | Test Standard |
| Water absorption | 0.7 | % | Sim. to ISO 62 |
| Humidity absorption | 0.2 | % | Sim. to ISO 62 |
| Density | 1100 | kg/m3 | ISO 1183 |
| Test specimen production | Value | Unit | Test Standard |
| Injection molding, melt temperature | 260 | °C | ISO 294 |
| Injection molding, mold temperature | 80 | °C | ISO 294 |
| Injection molding, injection velocity | 240 | mm/s | ISO 294 |
