杜邦LCP 5145L 液晶聚合物高分子材料耐高温电子元件专用塑料可焊锡塑料-东莞市胜浩塑胶原料有限公司

首页 > 产品展厅 > 工程塑料 > 杜邦LCP 5145L 液晶聚合物高分...

杜邦LCP 5145L 液晶聚合物高分子材料耐高温电子元件专用塑料可焊锡塑料

2022-11-29

产品详情

价格：70
产品名称杜邦LCP 5145L 液晶聚合物高分子材料耐高温电子元件专用塑料可焊锡塑料查看相似产品 >

简介

温馨提示：因橡塑行情波动太大，线上价格未能及时更新，更多详情及技术问题请来电咨询(微信同号）

ZENITE® 5145L | LCP-GF45 | Celanese

Product Texts

Zenite® 5145L is a 45% glass fiber reinforced and toughened liquid crystal polymer for injection molding. It has improved toughness.

Flammability @1.6mm nom. thickn. V-0 -

Flammability at thickness h (0.8 mm) V-0 UL recognition (h)

Rheological properties Value Unit Test Standard

Molding shrinkage, parallel 0.1 % ISO 294-4, 2577

Molding shrinkage, normal 0.5 % ISO 294-4, 2577

Mechanical properties Value Unit Test Standard

Tensile modulus 15000 MPa ISO 527-1/-2

Stress at break 115 MPa ISO 527-1/-2

Strain at break 3.1 % ISO 527-1/-2

Thermal properties Value Unit Test Standard

Melting temperature, 10°C/min 319 °C ISO 11357-1/-3

Temp. of deflection under load, 1.80 MPa 290 °C ISO 75-1/-2

Coeff. of linear therm. expansion, parallel 7 E-6/K ISO 11359-1/-2

Coeff. of linear therm. expansion, normal 60 E-6/K ISO 11359-1/-2

Burning behavior at 1.5 mm nominal thickness V-0 class IEC 60695-11-10

Thickness tested (1.5) 1.5 mm IEC 60695-11-10

Burning behavior at thickness h V-0 class IEC 60695-11-10

Thickness tested (h) 0.8 mm IEC 60695-11-10

Yellow Card available Yes - -

Oxygen index 33 % ISO 4589-1/-2

Electrical properties Value Unit Test Standard

Relative permittivity, 1MHz 3.9 - IEC 62631-2-1

Dissipation factor, 1MHz 180 E-4 IEC 62631-2-1

Volume resistivity 1E13 Ohm*m IEC 62631-3-1

Surface resistivity 1E15 Ohm IEC 62631-3-2

Electric strength 45 kV/mm IEC 60243-1

Other properties Value Unit Test Standard

Density 1750 kg/m3 ISO 1183

Rheological calculation properties Value Unit Test Standard

Density of melt 1480 kg/m3 -

Thermal conductivity of melt 0.35 W/(m K) -

Spec. heat capacity melt 1500 J/(kg K) -

Ejection temperature 265 °C -

...

联系我们

东莞市胜浩塑胶原料有限公司

联系人 叶经理
联系手机13620043019
联系电话13620043019
所在地址广东省东莞市樟木头镇先威路68号之一塑金塑胶商业中心14栋118室

推荐产品

Flammability @1.6mm nom. thickn.	V-0	-
Flammability at thickness h (0.8 mm)	V-0	UL recognition (h)

Rheological properties	Value	Unit	Test Standard
Molding shrinkage, parallel	0.1	%	ISO 294-4, 2577
Molding shrinkage, normal	0.5	%	ISO 294-4, 2577

Mechanical properties	Value	Unit	Test Standard
Tensile modulus	15000	MPa	ISO 527-1/-2
Stress at break	115	MPa	ISO 527-1/-2
Strain at break	3.1	%	ISO 527-1/-2

Thermal properties	Value	Unit	Test Standard
Melting temperature, 10°C/min	319	°C	ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa	290	°C	ISO 75-1/-2
Coeff. of linear therm. expansion, parallel	7	E-6/K	ISO 11359-1/-2
Coeff. of linear therm. expansion, normal	60	E-6/K	ISO 11359-1/-2
Burning behavior at 1.5 mm nominal thickness	V-0	class	IEC 60695-11-10
Thickness tested (1.5)	1.5	mm	IEC 60695-11-10
Burning behavior at thickness h	V-0	class	IEC 60695-11-10
Thickness tested (h)	0.8	mm	IEC 60695-11-10
Yellow Card available	Yes	-	-
Oxygen index	33	%	ISO 4589-1/-2

Electrical properties	Value	Unit	Test Standard
Relative permittivity, 1MHz	3.9	-	IEC 62631-2-1
Dissipation factor, 1MHz	180	E-4	IEC 62631-2-1
Volume resistivity	1E13	Ohm*m	IEC 62631-3-1
Surface resistivity	1E15	Ohm	IEC 62631-3-2
Electric strength	45	kV/mm	IEC 60243-1

Other properties	Value	Unit	Test Standard
Density	1750	kg/m3	ISO 1183

Rheological calculation properties	Value	Unit	Test Standard
Density of melt	1480	kg/m3	-
Thermal conductivity of melt	0.35	W/(m K)	-
Spec. heat capacity melt	1500	J/(kg K)	-
Ejection temperature	265	°C	-

杜邦LCP 5145L 液晶聚合物高分子材料 耐高温电子元件专用塑料 可焊锡塑料

东莞市胜浩塑胶原料有限公司

杜邦LCP 5145L 液晶聚合物高分子材料耐高温电子元件专用塑料可焊锡塑料