产品展厅
产品展厅
温馨提示：因橡塑行情波动太大，线上价格未能及时更新，更多详情及技术问题请来电咨询(微信同号）
VECTRA® E130i VF2201/BK210P 特性：耐高温，易流动。
VECTRA® E130i VF2201/BK210P 用途：适用于需要非常薄的墙壁的地方。广泛用于SMT应用，尺寸变化极小。30%玻璃填充。
VECTRA原则上应预先干燥。
由于必要的低 残留水分含量，建议使用干燥的空气干燥器。
露点应=< - 40°c。干燥和加工之间的时间应尽可能短。
在干燥器中储存材料，直到处理温度不需要降低A, B, C, D和V级(<= 24小时)。
| Flammability at thickness h | V-0 | - |
| Rheological properties | Value | Unit | Test Standard |
| Molding shrinkage, parallel | 0.1 | % | ISO 294-4, 2577 |
| Molding shrinkage, normal | 0.4 | % | ISO 294-4, 2577 |
| Mechanical properties | Value | Unit | Test Standard |
| Tensile modulus | 16000 | MPa | ISO 527-1/-2 |
| Stress at break | 160 | MPa | ISO 527-1/-2 |
| Strain at break | 1.6 | % | ISO 527-1/-2 |
| Charpy impact strength, +23°C | 43 | kJ/m2 | ISO 179/1eU |
| Charpy notched impact strength, +23°C | 38 | kJ/m2 | ISO 179/1eA |
| Thermal properties | Value | Unit | Test Standard |
| Melting temperature, 10°C/min | 335 | °C | ISO 11357-1/-3 |
| Temp. of deflection under load, 1.80 MPa | 270 | °C | ISO 75-1/-2 |
| Temp. of deflection under load, 8.00 MPa | 216 | °C | ISO 75-1/-2 |
| Vicat softening temperature, 50°C/h 50N | 195 | °C | ISO 306 |
| Coeff. of linear therm. expansion, parallel | 7 | E-6/K | ISO 11359-1/-2 |
| Coeff. of linear therm. expansion, normal | 20 | E-6/K | ISO 11359-1/-2 |
| Burning behavior at thickness h | V-0 | class | IEC 60695-11-10 |
| Oxygen index | 45 | % | ISO 4589-1/-2 |
| Electrical properties | Value | Unit | Test Standard |
| Relative permittivity, 100Hz | 4 | - | IEC 62631-2-1 |
| Relative permittivity, 1MHz | 3.9 | - | IEC 62631-2-1 |
| Dissipation factor, 100Hz | 100 | E-4 | IEC 62631-2-1 |
| Dissipation factor, 1MHz | 360 | E-4 | IEC 62631-2-1 |
| Volume resistivity | 1E13 | Ohm*m | IEC 62631-3-1 |
| Surface resistivity | 1E14 | Ohm | IEC 62631-3-2 |
| Electric strength | 32 | kV/mm | IEC 60243-1 |
| Other properties | Value | Unit | Test Standard |
| Humidity absorption | 0.03 | % | Sim. to ISO 62 |
| Density | 1610 | kg/m3 | ISO 1183 |
...
