非增强级BASF巴斯夫 PA66 A3W 快的成型牌号高流动尼龙66 耐热老化耐油-东莞市胜浩塑胶原料有限公司

首页 > 产品展厅 > 工程塑料 > 非增强级BASF巴斯夫 PA66 A3W ...

非增强级BASF巴斯夫 PA66 A3W 快的成型牌号高流动尼龙66 耐热老化耐油

2022-11-30

产品详情

价格：30
产品名称非增强级BASF巴斯夫 PA66 A3W 快的成型牌号高流动尼龙66 耐热老化耐油查看相似产品 >

简介

温馨提示：因橡塑行情波动太大，线上价格未能及时更新，更多详情及技术问题请来电咨询(微信同号）

等级	厂家	型号	特性	用途
非增强级	BASF ® 巴斯夫	A3K	绝缘快的成型周期良好的流动性耐油性能	轴承，齿轮和电气绝缘部件，如端子和电缆连接器
非增强级	BASF ® 巴斯夫	A3W	快的成型周期良好的流动性良好的耐热老化性能耐油性能	用途包括高应力部件，如轴承，轴承保持架，齿轮，线圈架和电缆连接器。
非增强级	BASF ® 巴斯夫	A3Z	冲击改性耐低温冲击耐油性能	外壳

等级厂家型号特性用途

非增强级 BASF ® 巴斯夫 A3K 绝缘快的成型周期良好的流动性耐油性能 轴承，齿轮和电气绝缘部件，如端子和电缆连接器

非增强级 BASF ® 巴斯夫 A3W 快的成型周期良好的流动性良好的耐热老化性能耐油性能 用途包括高应力部件，如轴承，轴承保持架，齿轮，线圈架和电缆连接器。

非增强级 BASF ® 巴斯夫 A3Z 冲击改性耐低温冲击耐油性能 外壳

等级	厂家	型号	特性	用途
食品级	BASF ® 巴斯夫	A3EG7 FC	35%玻璃纤维增强的注塑级产品，用于与食品接触的物品。	射出成型
食品级	BASF ® 巴斯夫	A3EG6 FC	30％玻璃纤维，符合FDA，欧洲食品接触（EU）Nr等多个区域食品接触法规。10/2011和GMP（EC）n°2023/2006。	射出成型

Ultramid® A3W | PA66 | BASF

Product Texts

An easy flowing, heat aging resistant injection moulding grade for fast processing. Uses include highly stressed parts such as bearings, bearing cages, gear-wheels, coil formers and cable connectors.

Rheological properties dry / cond Unit Test Standard

Melt volume-flow rate, MVR 100 / * cm3/10min ISO 1133

Temperature 275 / * °C ISO 1133

Load 5 / * kg ISO 1133

Molding shrinkage, parallel 1.5 / * % ISO 294-4, 2577

Molding shrinkage, normal 1.8 / * % ISO 294-4, 2577

Mechanical properties dry / cond Unit Test Standard

Tensile modulus 3000 / 1100 MPa ISO 527-1/-2

Yield stress 85 / 50 MPa ISO 527-1/-2

Yield strain 4.4 / 20 % ISO 527-1/-2

Nominal strain at break 25 / >50 % ISO 527-1/-2

Tensile creep modulus, 1h * / 1100 MPa ISO 899-1

Tensile creep modulus, 1000h * / 700 MPa ISO 899-1

Charpy impact strength, +23°C N / N kJ/m2 ISO 179/1eU

Charpy notched impact strength, +23°C 6 / 20 kJ/m2 ISO 179/1eA

Charpy notched impact strength, -30°C 5 / - kJ/m2 ISO 179/1eA

Thermal properties dry / cond Unit Test Standard

Melting temperature, 10°C/min 260 / * °C ISO 11357-1/-3

Temp. of deflection under load, 1.80 MPa 75 / * °C ISO 75-1/-2

Temp. of deflection under load, 0.45 MPa 220 / * °C ISO 75-1/-2

Vicat softening temperature, 50°C/h 50N 250 / * °C ISO 306

Coeff. of linear therm. expansion, parallel 98 / * E-6/K ISO 11359-1/-2

Burning behavior at 1.5 mm nominal thickness V-2 / * class IEC 60695-11-10

Thickness tested (1.5) 1.5 / * mm IEC 60695-11-10

Yellow Card available Yes / * - -

Burning behavior at thickness h V-2 / * class IEC 60695-11-10

Thickness tested (h) 0.8 / * mm IEC 60695-11-10

Yellow Card available Yes / * - -

Burning rate, thickness 1 mm 0 mm/min ISO 3795 (FMVSS 302)

Oxygen index 28 / * % ISO 4589-1/-2

Electrical properties dry / cond Unit Test Standard

Relative permittivity, 100Hz 3.8 / - - IEC 62631-2-1

Relative permittivity, 1MHz 3.2 / 5 - IEC 62631-2-1

Dissipation factor, 100Hz 50 / - E-4 IEC 62631-2-1

Dissipation factor, 1MHz 250 / 2000 E-4 IEC 62631-2-1

Volume resistivity 1E13 / 1E9 Ohmm IEC 62631-3-1

Surface resistivity / 1E9 Ohm IEC 62631-3-2

Comparative tracking index - / 500 - IEC 60112

Other properties dry / cond Unit Test Standard

Water absorption 8.5 / * % Sim. to ISO 62

Humidity absorption 2.8 / * % Sim. to ISO 62

Density 1130 / - kg/m3 ISO 1183

Material specific properties dry / cond Unit Test Standard

Viscosity number 150 / * cm3/g ISO 307, 1157, 1628

Rheological calculation properties Value Unit Test Standard

Ejection temperature 180 °C -

Test specimen production Value Unit Test Standard

Injection molding, melt temperature 290 °C ISO 294

Injection molding, mold temperature 80 °C ISO 294

Injection molding, injection velocity 200 mm/s ISO 294

...

联系我们

东莞市胜浩塑胶原料有限公司

联系人 叶经理
联系手机13620043019
联系电话13620043019
所在地址广东省东莞市樟木头镇先威路68号之一塑金塑胶商业中心14栋118室

推荐产品

Rheological properties	dry / cond	Unit	Test Standard
Melt volume-flow rate, MVR	100 / *	cm3/10min	ISO 1133
Temperature	275 / *	°C	ISO 1133
Load	5 / *	kg	ISO 1133
Molding shrinkage, parallel	1.5 / *	%	ISO 294-4, 2577
Molding shrinkage, normal	1.8 / *	%	ISO 294-4, 2577

Mechanical properties	dry / cond	Unit	Test Standard
Tensile modulus	3000 / 1100	MPa	ISO 527-1/-2
Yield stress	85 / 50	MPa	ISO 527-1/-2
Yield strain	4.4 / 20	%	ISO 527-1/-2
Nominal strain at break	25 / >50	%	ISO 527-1/-2
Tensile creep modulus, 1h	* / 1100	MPa	ISO 899-1
Tensile creep modulus, 1000h	* / 700	MPa	ISO 899-1
Charpy impact strength, +23°C	N / N	kJ/m2	ISO 179/1eU
Charpy notched impact strength, +23°C	6 / 20	kJ/m2	ISO 179/1eA
Charpy notched impact strength, -30°C	5 / -	kJ/m2	ISO 179/1eA

Thermal properties	dry / cond	Unit	Test Standard
Melting temperature, 10°C/min	260 / *	°C	ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa	75 / *	°C	ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa	220 / *	°C	ISO 75-1/-2
Vicat softening temperature, 50°C/h 50N	250 / *	°C	ISO 306
Coeff. of linear therm. expansion, parallel	98 / *	E-6/K	ISO 11359-1/-2
Burning behavior at 1.5 mm nominal thickness	V-2 / *	class	IEC 60695-11-10
Thickness tested (1.5)	1.5 / *	mm	IEC 60695-11-10
Yellow Card available	Yes / *	-	-
Burning behavior at thickness h	V-2 / *	class	IEC 60695-11-10
Thickness tested (h)	0.8 / *	mm	IEC 60695-11-10
Yellow Card available	Yes / *	-	-
Burning rate, thickness 1 mm	0	mm/min	ISO 3795 (FMVSS 302)
Oxygen index	28 / *	%	ISO 4589-1/-2

Electrical properties	dry / cond	Unit	Test Standard
Relative permittivity, 100Hz	3.8 / -	-	IEC 62631-2-1
Relative permittivity, 1MHz	3.2 / 5	-	IEC 62631-2-1
Dissipation factor, 100Hz	50 / -	E-4	IEC 62631-2-1
Dissipation factor, 1MHz	250 / 2000	E-4	IEC 62631-2-1
Volume resistivity	1E13 / 1E9	Ohm*m	IEC 62631-3-1
Surface resistivity	* / 1E9	Ohm	IEC 62631-3-2
Comparative tracking index	- / 500	-	IEC 60112

Other properties	dry / cond	Unit	Test Standard
Water absorption	8.5 / *	%	Sim. to ISO 62
Humidity absorption	2.8 / *	%	Sim. to ISO 62
Density	1130 / -	kg/m3	ISO 1183

Material specific properties	dry / cond	Unit	Test Standard
Viscosity number	150 / *	cm3/g	ISO 307, 1157, 1628

Rheological calculation properties	Value	Unit	Test Standard
Ejection temperature	180	°C	-

Test specimen production	Value	Unit	Test Standard
Injection molding, melt temperature	290	°C	ISO 294
Injection molding, mold temperature	80	°C	ISO 294
Injection molding, injection velocity	200	mm/s	ISO 294

非增强级BASF巴斯夫 PA66 A3W 快的成型牌号 高流动尼龙66 耐热老化 耐油

东莞市胜浩塑胶原料有限公司

非增强级BASF巴斯夫 PA66 A3W 快的成型牌号高流动尼龙66 耐热老化耐油