PA66食品级尼龙 BASF Ultramid A3EG6 FC 加30％玻纤符合FDA级-东莞市胜浩塑胶原料有限公司

首页 > 产品展厅 > 工程塑料 > PA66食品级尼龙 BASF Ultramid...

PA66食品级尼龙 BASF Ultramid A3EG6 FC 加30％玻纤符合FDA级

2022-11-30

产品详情

价格：30
产品名称PA66食品级尼龙 BASF Ultramid A3EG6 FC 加30％玻纤符合FDA级查看相似产品 >

简介

温馨提示：因橡塑行情波动太大，线上价格未能及时更新，更多详情及技术问题请来电咨询(微信同号）

等级	厂家	型号	特性	用途
非增强级	BASF ® 巴斯夫	A3K	绝缘快的成型周期良好的流动性耐油性能	轴承，齿轮和电气绝缘部件，如端子和电缆连接器
非增强级	BASF ® 巴斯夫	A3W	快的成型周期良好的流动性良好的耐热老化性能耐油性能	用途包括高应力部件，如轴承，轴承保持架，齿轮，线圈架和电缆连接器。
非增强级	BASF ® 巴斯夫	A3Z	冲击改性耐低温冲击耐油性能	外壳

等级厂家型号特性用途

非增强级 BASF ® 巴斯夫 A3K 绝缘快的成型周期良好的流动性耐油性能 轴承，齿轮和电气绝缘部件，如端子和电缆连接器

非增强级 BASF ® 巴斯夫 A3W 快的成型周期良好的流动性良好的耐热老化性能耐油性能 用途包括高应力部件，如轴承，轴承保持架，齿轮，线圈架和电缆连接器。

非增强级 BASF ® 巴斯夫 A3Z 冲击改性耐低温冲击耐油性能 外壳

等级	厂家	型号	特性	用途
食品级	BASF ® 巴斯夫	A3EG7 FC	35%玻璃纤维增强的注塑级产品，用于与食品接触的物品。	射出成型
食品级	BASF ® 巴斯夫	A3EG6 FC	30％玻璃纤维，符合FDA，欧洲食品接触（EU）Nr等多个区域食品接触法规。10/2011和GMP（EC）n°2023/2006。	射出成型

Ultramid® A3EG6 FC | PA66-GF30 | BASF

Product Texts

The BASF Ultramid® FC (Food Contact) grades enable the industry to develop products for food contact applications which are in compliance with multiple regional food contact regulations including FDA, European Food Contact (EU) Nr. 10/2011 and GMP (EC) n°2023/2006.

Additional food contact compliances may also be available. Please contact your local representative or plastics safety (E-Mail: plastics.safety@basf.com, Fax: 49 621-60-93253).

Rheological properties dry / cond Unit Test Standard

Melt volume-flow rate, MVR 40 / * cm3/10min ISO 1133

Temperature 275 / * °C ISO 1133

Load 5 / * kg ISO 1133

Molding shrinkage, parallel 0.5 / * % ISO 294-4, 2577

Molding shrinkage, normal 1.0 / * % ISO 294-4, 2577

Mechanical properties dry / cond Unit Test Standard

Tensile modulus 10000 / 7200 MPa ISO 527-1/-2

Stress at break 190 / 130 MPa ISO 527-1/-2

Strain at break 3 / 5 % ISO 527-1/-2

Tensile creep modulus, 1000h * / 5300 MPa ISO 899-1

Charpy impact strength, +23°C 85 / 100 kJ/m2 ISO 179/1eU

Charpy impact strength, -30°C 70 / - kJ/m2 ISO 179/1eU

Charpy notched impact strength, +23°C 13 / 22 kJ/m2 ISO 179/1eA

Charpy notched impact strength, -30°C 11 / - kJ/m2 ISO 179/1eA

Thermal properties dry / cond Unit Test Standard

Melting temperature, 10°C/min 260 / * °C ISO 11357-1/-3

Temp. of deflection under load, 1.80 MPa 250 / * °C ISO 75-1/-2

Temp. of deflection under load, 0.45 MPa 250 / * °C ISO 75-1/-2

Vicat softening temperature, 50°C/h 50N 250 / * °C ISO 306

Burning behavior at 1.5 mm nominal thickness HB / * class IEC 60695-11-10

Thickness tested (1.5) 1.6 / * mm IEC 60695-11-10

Yellow Card available Yes / * - -

Burning behavior at thickness h HB / * class IEC 60695-11-10

Thickness tested (h) 0.8 / * mm IEC 60695-11-10

Yellow Card available Yes / * - -

Oxygen index 24 / * % ISO 4589-1/-2

Electrical properties dry / cond Unit Test Standard

Relative permittivity, 1MHz 3.5 / 5.6 - IEC 62631-2-1

Dissipation factor, 100Hz 140 / 2300 E-4 IEC 62631-2-1

Dissipation factor, 1MHz 140 / 1600 E-4 IEC 62631-2-1

Volume resistivity 1E13 / 1E10 Ohmm IEC 62631-3-1

Surface resistivity / 1E10 Ohm IEC 62631-3-2

Electric strength 40 / 37 kV/mm IEC 60243-1

Comparative tracking index - / 550 - IEC 60112

Other properties dry / cond Unit Test Standard

Water absorption 5.5 / * % Sim. to ISO 62

Humidity absorption 1.7 / * % Sim. to ISO 62

Density 1360 / - kg/m3 ISO 1183

Material specific properties dry / cond Unit Test Standard

Viscosity number 145 / * cm3/g ISO 307, 1157, 1628

Rheological calculation properties Value Unit Test Standard

Ejection temperature 195 °C -

Test specimen production Value Unit Test Standard

Injection molding, melt temperature 290 °C ISO 294

Injection molding, mold temperature 80 °C ISO 294

Injection molding, injection velocity 200 mm/s ISO 294

...

联系我们

东莞市胜浩塑胶原料有限公司

联系人 叶经理
联系手机13620043019
联系电话13620043019
所在地址广东省东莞市樟木头镇先威路68号之一塑金塑胶商业中心14栋118室

推荐产品

Rheological properties	dry / cond	Unit	Test Standard
Melt volume-flow rate, MVR	40 / *	cm3/10min	ISO 1133
Temperature	275 / *	°C	ISO 1133
Load	5 / *	kg	ISO 1133
Molding shrinkage, parallel	0.5 / *	%	ISO 294-4, 2577
Molding shrinkage, normal	1.0 / *	%	ISO 294-4, 2577

Mechanical properties	dry / cond	Unit	Test Standard
Tensile modulus	10000 / 7200	MPa	ISO 527-1/-2
Stress at break	190 / 130	MPa	ISO 527-1/-2
Strain at break	3 / 5	%	ISO 527-1/-2
Tensile creep modulus, 1000h	* / 5300	MPa	ISO 899-1
Charpy impact strength, +23°C	85 / 100	kJ/m2	ISO 179/1eU
Charpy impact strength, -30°C	70 / -	kJ/m2	ISO 179/1eU
Charpy notched impact strength, +23°C	13 / 22	kJ/m2	ISO 179/1eA
Charpy notched impact strength, -30°C	11 / -	kJ/m2	ISO 179/1eA

Thermal properties	dry / cond	Unit	Test Standard
Melting temperature, 10°C/min	260 / *	°C	ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa	250 / *	°C	ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa	250 / *	°C	ISO 75-1/-2
Vicat softening temperature, 50°C/h 50N	250 / *	°C	ISO 306
Burning behavior at 1.5 mm nominal thickness	HB / *	class	IEC 60695-11-10
Thickness tested (1.5)	1.6 / *	mm	IEC 60695-11-10
Yellow Card available	Yes / *	-	-
Burning behavior at thickness h	HB / *	class	IEC 60695-11-10
Thickness tested (h)	0.8 / *	mm	IEC 60695-11-10
Yellow Card available	Yes / *	-	-
Oxygen index	24 / *	%	ISO 4589-1/-2

Electrical properties	dry / cond	Unit	Test Standard
Relative permittivity, 1MHz	3.5 / 5.6	-	IEC 62631-2-1
Dissipation factor, 100Hz	140 / 2300	E-4	IEC 62631-2-1
Dissipation factor, 1MHz	140 / 1600	E-4	IEC 62631-2-1
Volume resistivity	1E13 / 1E10	Ohm*m	IEC 62631-3-1
Surface resistivity	* / 1E10	Ohm	IEC 62631-3-2
Electric strength	40 / 37	kV/mm	IEC 60243-1
Comparative tracking index	- / 550	-	IEC 60112

Other properties	dry / cond	Unit	Test Standard
Water absorption	5.5 / *	%	Sim. to ISO 62
Humidity absorption	1.7 / *	%	Sim. to ISO 62
Density	1360 / -	kg/m3	ISO 1183

Material specific properties	dry / cond	Unit	Test Standard
Viscosity number	145 / *	cm3/g	ISO 307, 1157, 1628

Rheological calculation properties	Value	Unit	Test Standard
Ejection temperature	195	°C	-

Test specimen production	Value	Unit	Test Standard
Injection molding, melt temperature	290	°C	ISO 294
Injection molding, mold temperature	80	°C	ISO 294
Injection molding, injection velocity	200	mm/s	ISO 294

PA66食品级尼龙 BASF Ultramid A3EG6 FC 加30％玻纤 符合FDA级

东莞市胜浩塑胶原料有限公司

PA66食品级尼龙 BASF Ultramid A3EG6 FC 加30％玻纤符合FDA级